dmesg - Intel Core 2 Duo P8600
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000af000000 (usable)
BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved)
BIOS-e820: 00000000bf000000 - 00000000bf70f000 (usable)
BIOS-e820: 00000000bf70f000 - 00000000bf930000 (ACPI NVS)
BIOS-e820: 00000000bf930000 - 00000000bf931000 (ACPI data)
BIOS-e820: 00000000bf931000 - 00000000bf939000 (ACPI NVS)
BIOS-e820: 00000000bf939000 - 00000000bfef9000 (ACPI data)
BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
BIOS-e820: 00000000d3500000 - 00000000d3501000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
DMI 2.4 present.
last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 0BFF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbf70f max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf70f000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf70f000 page 4k
kernel direct mapping tables up to bf70f000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000240000000
0100000000 - 0240000000 page 2M
kernel direct mapping tables up to 240000000 @ b000-15000
RAMDISK: 37634000 - 37fef974
ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
ACPI: XSDT 00000000bf96a1c0 00084 (v01 APPLE Apple00 00000042 01000013)
ACPI: FACP 00000000bf968000 000F4 (v04 APPLE Apple00 00000042 Loki 0000005F)
ACPI: DSDT 00000000bf95b000 0548F (v01 APPLE Macmini 00040001 INTL 20061109)
ACPI: FACS 00000000bf71e000 00040
ACPI: HPET 00000000bf967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 00000000bf966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 00000000bf965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ASF! 00000000bf963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 00000000bf962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 00000000bf961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 00000000bf957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
ACPI: SSDT 00000000bf956000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
ACPI: MCFG 00000000bf964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 00000000bf95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
ACPI: SSDT 00000000bf959000 0009F (v01 SataRe SataSec 00001000 INTL 20061109)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Bootmem setup node 0 0000000000000000-0000000240000000
NODE_DATA [0000000000010000 - 0000000000017fff]
bootmap [0000000000018000 - 000000000005ffff] pages 48
(8 early reservations) ==> bootmem [0000000000 - 0240000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000 - 00016d95c4]
#3 [0037634000 - 0037fef974] RAMDISK ==> [0037634000 - 0037fef974]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [00016da000 - 00016da1ed] BRK ==> [00016da000 - 00016da1ed]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00240000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000008f
0: 0x00000090 -> 0x0000009f
0: 0x00000100 -> 0x000af000
0: 0x000bf000 -> 0x000bf70f
0: 0x00100000 -> 0x00240000
On node 0 totalpages: 2029229
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3835 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 700231 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
PM: Registered nosave memory: 00000000bf70f000 - 00000000bf930000
PM: Registered nosave memory: 00000000bf930000 - 00000000bf931000
PM: Registered nosave memory: 00000000bf931000 - 00000000bf939000
PM: Registered nosave memory: 00000000bf939000 - 00000000bfef9000
PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000d3500000
PM: Registered nosave memory: 00000000d3500000 - 00000000d3501000
PM: Registered nosave memory: 00000000d3501000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at d3501000 (gap: d3501000:1caff000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s90328 r8192 d24360 u1048576
pcpu-alloc: s90328 r8192 d24360 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1996866
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880008b1e000 - ffff88000cb1e000
software IO TLB at phys 0x8b1e000 - 0xcb1e000
Memory: 7918588k/9437184k available (3083k kernel code, 1320268k absent, 198328k reserved, 2048k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2388.857 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4777.71 BogoMIPS (lpj=9555428)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9556.10 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group ffff880008a0fbf0 cpus 0 group ffff880008b0fbf0 cpus 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group ffff880008b0fbf0 cpus 1 group ffff880008a0fbf0 cpus 0
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 5
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f05fffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: reg 10 io port: [0x2100-0x21ff]
pci 0000:00:03.2: reg 10 io port: [0x00-0xff]
pci 0000:00:03.2: reg 20 io port: [0x2240-0x227f]
pci 0000:00:03.2: reg 24 io port: [0x2200-0x223f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.4: reg 10 32bit mmio: [0xd3500000-0xd357ffff]
pci 0000:00:04.0: reg 10 32bit mmio: [0xd358a000-0xd358afff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10 32bit mmio: [0xd358b100-0xd358b1ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 10 32bit mmio: [0xd3589000-0xd3589fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: reg 10 32bit mmio: [0xd358b000-0xd358b0ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: reg 10 32bit mmio: [0xd3580000-0xd3583fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0a.0: reg 10 io port: [0x2298-0x229f]
pci 0000:00:0a.0: reg 14 io port: [0x22a4-0x22a7]
pci 0000:00:0a.0: reg 18 io port: [0x2290-0x2297]
pci 0000:00:0a.0: reg 1c io port: [0x22a0-0x22a3]
pci 0000:00:0a.0: reg 20 io port: [0x2280-0x228f]
pci 0000:00:0a.0: reg 24 32bit mmio: [0xd3584000-0xd3585fff]
pci 0000:00:0b.0: reg 10 32bit mmio: [0xd3588000-0xd3588fff]
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:01:00.0: supports D1 D2
pci 0000:00:0e.0: bridge 32bit mmio: [0xd3400000-0xd34fffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xd3404000-0xd34047ff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xd3400000-0xd3403fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:01:00.0: bridge 32bit mmio: [0xd3400000-0xd34fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xd3300000-0xd3303fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:15.0: bridge 32bit mmio: [0xd3300000-0xd33fffff]
pci 0000:04:00.0: reg 10 64bit mmio pref: [0xd3100000-0xd310ffff]
pci 0000:04:00.0: reg 18 64bit mmio pref: [0xd3110000-0xd311ffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10 64bit mmio pref: [0xd3120000-0xd312ffff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:00:16.0: bridge 32bit mmio: [0xd3200000-0xd32fffff]
pci 0000:00:16.0: bridge 64bit mmio pref: [0xd3100000-0xd31fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
pci 0000:05:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:05:00.0: reg 1c 64bit mmio pref: [0xd0000000-0xd1ffffff]
pci 0000:05:00.0: reg 24 io port: [0x1000-0x107f]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0xd3000000-0xd301ffff]
pci 0000:00:17.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:17.0: bridge 32bit mmio: [0xd2000000-0xd30fffff]
pci 0000:00:17.0: bridge 64bit mmio pref: [0xc0000000-0xd1ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: io resource (0x10-0x1f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x22-0x3f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x44-0x5f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x63-0x63) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x65-0x65) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x67-0x6f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x72-0x73) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x74-0x7f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x91-0x93) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x97-0x9f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0xa2-0xbf) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0xe0-0xef) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp 00:06: io resource (0x80-0x80) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x400-0x47f has been reserved
system 00:06: ioport range 0x480-0x4ff has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x295-0x296 has been reserved
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: disabled
pci 0000:01:00.0: MEM window: 0xd3400000-0xd34fffff
pci 0000:01:00.0: PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:0e.0: IO window: disabled
pci 0000:00:0e.0: MEM window: 0xd3400000-0xd34fffff
pci 0000:00:0e.0: PREFETCH window: disabled
pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
pci 0000:00:15.0: IO window: disabled
pci 0000:00:15.0: MEM window: 0xd3300000-0xd33fffff
pci 0000:00:15.0: PREFETCH window: disabled
pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
pci 0000:00:16.0: IO window: disabled
pci 0000:00:16.0: MEM window: 0xd3200000-0xd32fffff
pci 0000:00:16.0: PREFETCH window: 0x000000d3100000-0x000000d31fffff
pci 0000:00:17.0: PCI bridge, secondary bus 0000:05
pci 0000:00:17.0: IO window: 0x1000-0x1fff
pci 0000:00:17.0: MEM window: 0xd2000000-0xd30fffff
pci 0000:00:17.0: PREFETCH window: 0x000000c0000000-0x000000d1ffffff
ACPI: PCI Interrupt Link [Z00B] enabled at IRQ 23
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0e.0: PCI INT A -> Link[Z00B] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:0e.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:00:15.0: power state changed by ACPI to D0
pci 0000:00:15.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:15.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:16.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:16.0: setting latency timer to 64
pci 0000:00:17.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xd3400000-0xd34fffff]
pci_bus 0000:02: resource 1 mem: [0xd3400000-0xd34fffff]
pci_bus 0000:03: resource 1 mem: [0xd3300000-0xd33fffff]
pci_bus 0000:04: resource 1 mem: [0xd3200000-0xd32fffff]
pci_bus 0000:04: resource 2 pref mem [0xd3100000-0xd31fffff]
pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:05: resource 1 mem: [0xd2000000-0xd30fffff]
pci_bus 0000:05: resource 2 pref mem [0xc0000000-0xd1ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:04.0: power state changed by ACPI to D0
pci 0000:00:04.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:04.0: PCI INT A disabled
pci 0000:00:04.1: power state changed by ACPI to D0
pci 0000:00:04.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:04.1: PCI INT B disabled
pci 0000:00:06.0: power state changed by ACPI to D0
pci 0000:00:06.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: PCI INT A disabled
pci 0000:00:06.1: power state changed by ACPI to D0
pci 0000:00:06.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z001] enabled at IRQ 17
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:06.1: PCI INT B disabled
pci 0000:05:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9966k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1344610480.587:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15485
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0e.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:15.0: irq 25 for MSI/MSI-X
pcieport 0000:00:15.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:16.0: irq 26 for MSI/MSI-X
pcieport 0000:00:16.0: setting latency timer to 64
efifb: dmi detected Macmini4,1 - framebuffer at 00000000c0010000 (1920x1200, stride 8192)
Linux agpgart interface v0.103
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2012-08-10 14:54:41 UTC (1344610481)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4240k
udev[56]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
SCSI subsystem initialized
firewire_ohci 0000:02:00.0: PCI INT A -> Link[Z00B] -> GSI 23 (level, low) -> IRQ 23
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
ehci_hcd 0000:00:04.1: irq 19, io mem 0xd358b100
sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 0)
ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 16
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
sdhci-pci 0000:04:00.1: PCI INT B -> Link[Z00O] -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:04:00.1: Invalid iomem size. You may experience problems.
sdhci-pci 0000:04:00.1: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
tg3.c:v3.116 (December 3, 2010)
tg3 0000:04:00.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21
tg3 0000:04:00.0: setting latency timer to 64
libata version 3.00 loaded.
tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785000] (PCI Express) MAC address c4:2c:03:21:cc:38
tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
ehci_hcd 0000:00:06.1: irq 17, io mem 0xd358b000
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:06.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ahci 0000:00:0a.0: version 3.0
ata_generic 0000:00:0a.0: power state changed by ACPI to D0
ata_generic 0000:00:0a.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
ata_generic 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
ata_generic 0000:00:0a.0: setting latency timer to 64
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0x2298 ctl 0x22a4 bmdma 0x2280 irq 23
ata2: PATA max UDMA/100 cmd 0x2290 ctl 0x22a0 bmdma 0x2288 irq 23
ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 20, io mem 0xd358a000
firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI version 1.10
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:04.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 18, io mem 0xd3589000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:06.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ata1.00: ATA-9: M4-CT256M4SSD2, 0309, max UDMA/100
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 0309 PQ: 0 ANSI: 5
ata2.01: NODEV after polling detection
ata2.00: ATAPI: OPTIARC DVD RW AD-5680H, 3AHB, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM OPTIARC DVD RW AD-5680H 3AHB PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
firewire_core: created device fw0: GUID d8a25efffef278bc, S800
usb 4-5: new low speed USB device using ohci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Resume from partition 8:5
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[394]: starting version 164
usb 4-5: New USB device found, idVendor=05ac, idProduct=8242
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: IR Receiver
usb 4-5: Manufacturer: Apple Computer, Inc.
usb 4-5: configuration #1 chosen from 1 choice
input: PC Speaker as /devices/platform/pcspkr/input/input1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bf71dc98 00238 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000bf71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000bf71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000bf71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
applesmc: Apple Macmini detected:
applesmc: - Model without accelerometer
applesmc: - Model without light sensors and backlight
applesmc: - Model with 2 temperature sensors
applesmc: device successfully initialized.
applesmc: 1 fans found.
applesmc: driver successfully loaded.
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:30/LNXVIDEO:00/input/input5
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
Switching to clocksource hpet
processor LNXCPU:01: registered as cooling_device1
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 4-6: new full speed USB device using ohci_hcd and address 3
usb 4-6: New USB device found, idVendor=0a5c, idProduct=4500
usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-6: Product: BRCM2070 Hub
usb 4-6: Manufacturer: Apple Inc.
usb 4-6: configuration #1 chosen from 1 choice
brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
brcm80211 0000:03:00.0: PCI INT A -> Link[Z00J] -> GSI 22 (level, low) -> IRQ 22
brcm80211 0000:03:00.0: setting latency timer to 64
brcm80211 0000:03:00.0: firmware: requesting brcm/bcm43xx-0.fw
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
brcm80211: fail to load firmware brcm/bcm43xx-0.fw
brcm80211: Failed to find firmware usually in /lib/firmware/brcm
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
brcm80211 0000:03:00.0: PCI INT A disabled
brcm80211: wl_pci_probe: wl_attach failed!
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:08.0: setting latency timer to 64
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 3 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:06.0-5/input0
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 21
nvidia 0000:05:00.0: PCI INT A -> Link[LGPU] -> GSI 21 (level, low) -> IRQ 21
nvidia 0000:05:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
usb 4-6.1: new full speed USB device using ohci_hcd and address 4
usb 4-6.1: New USB device found, idVendor=05ac, idProduct=820a
usb 4-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-6.1: configuration #1 chosen from 1 choice
input: HID 05ac:820a as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.1/4-6.1:1.0/input/input6
generic-usb 0003:05AC:820A.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-6.1/input0
usb 4-6.2: new full speed USB device using ohci_hcd and address 5
usb 4-6.2: New USB device found, idVendor=05ac, idProduct=820b
usb 4-6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-6.2: configuration #1 chosen from 1 choice
input: HID 05ac:820b as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.2/4-6.2:1.0/input/input7
generic-usb 0003:05AC:820B.0003: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-6.2/input0
usb 4-6.3: new full speed USB device using ohci_hcd and address 6
usb 4-6.3: New USB device found, idVendor=05ac, idProduct=8218
usb 4-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-6.3: Product: Bluetooth USB Host Controller
usb 4-6.3: Manufacturer: Apple Inc.
usb 4-6.3: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Adding 3245848k swap on /dev/sda5. Priority:-1 extents:1 across:3245848k SS
EXT3 FS on sda4, internal journal
loop: module loaded
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.13)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Ebtables v2.0 registered
eth0: no IPv6 routers present
ip6_tables: (C) 2000-2006 Netfilter Core Team
device eth0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(eth0) entering forwarding state
virbr0: neighbor 1000.b4:39:d6:00:18:40 lost on port 1(eth0)
virbr0: port 1(eth0) entering disabled state
device eth0 left promiscuous mode
virbr0: port 1(eth0) entering disabled state
virbr1: starting userspace STP failed, starting kernel STP
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device vnet0 entered promiscuous mode
virbr1: topology change detected, propagating
virbr1: port 1(vnet0) entering forwarding state
device vnet1 entered promiscuous mode
virbr1: topology change detected, propagating
virbr1: port 2(vnet1) entering forwarding state
device vnet2 entered promiscuous mode
virbr1: topology change detected, propagating
virbr1: port 3(vnet2) entering forwarding state
vnet0: no IPv6 routers present
vnet1: no IPv6 routers present
vnet2: no IPv6 routers present
kvm: emulating exchange as write
CE: hpet increasing min_delta_ns to 23040 nsec
applesmc: wait status failed: 4 != 0
hrtimer: interrupt took 15001 ns
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
virbr1: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr1: port 1(vnet0) entering disabled state
virbr1: port 3(vnet2) entering disabled state
device vnet2 left promiscuous mode
virbr1: port 3(vnet2) entering disabled state
virbr1: port 2(vnet1) entering disabled state
device vnet1 left promiscuous mode
virbr1: port 2(vnet1) entering disabled state
device vnet0 entered promiscuous mode
virbr1: topology change detected, propagating
virbr1: port 1(vnet0) entering forwarding state
device vnet1 entered promiscuous mode
virbr1: topology change detected, propagating
virbr1: port 2(vnet1) entering forwarding state
device vnet2 entered promiscuous mode
virbr1: topology change detected, propagating
virbr1: port 3(vnet2) entering forwarding state
vnet0: no IPv6 routers present
vnet1: no IPv6 routers present
vnet2: no IPv6 routers present
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 5
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb 1-4: New USB device found, idVendor=0781, idProduct=5530
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: Cruzer
usb 1-4: Manufacturer: SanDisk
usb 1-4: SerialNumber: 200524441004E9027F12
usb 1-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access SanDisk Cruzer 1.20 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Registering the dns_resolver key type
Slow work thread pool: Starting up
Slow work thread pool: Ready
usb 1-4: USB disconnect, address 2
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 4 != 0
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
applesmc: wait status failed: 5 != 1
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
CPU1: Temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Temperature/speed normal
Machine check events logged
virbr1: port 3(vnet2) entering disabled state
device vnet2 left promiscuous mode
virbr1: port 3(vnet2) entering disabled state
virbr1: port 2(vnet1) entering disabled state
device vnet1 left promiscuous mode
virbr1: port 2(vnet1) entering disabled state
virbr1: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr1: port 1(vnet0) entering disabled state
CPU1: Temperature above threshold, cpu clock throttled (total events = 1240)
CPU1: Temperature/speed normal
CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Temperature/speed normal
Machine check events logged